Search

Thermodyne Engineering Systems

ISO 9001:2008 | Industrial Steam Boiler Manufacturers

Difference between Fire Tube Boiler and Water Tube Boiler

The difference between fire tube boiler and water tube boiler can be done on various points. These points includes types of fluid flows within the tubes, steam generation rate, floor area required for the steam generation, transportation, efficiency, fluctuating loads,... Continue Reading →

What problems can occur if a steam boiler level sensor fails?

Dirty water, a too-high pH, overfiring and improper near-boiler piping can all cause the boiler's water line to surge up and down. If there's an automatic water feeder on the boiler, it will open and close each time the water... Continue Reading →

Can we operate a boiler of 8 ton/hr steam with ID fan only instead of using both FD and ID fan?

Yes - but that does not mean that that is the best way to do it, for reasons of efficiency, emissions and control. Forget your load (8000 kg/h) as it is not really relevant.  Take a look at some 19th... Continue Reading →

What are the Indian boiler regulations?

What is IBR? IBR is Indian Boiler Regulations, which was created in 15th September 1950 in exercise of the powers conferred by section 28 & 29 of the Indian Boilers Act. The Indian Boilers Act was formed in 1923, 23rd... Continue Reading →

What is Slagging and Fouling in Boilers?

Based on different mechanisms involved in ash deposit on the heat surface, two general types of ash deposition have been defined as slagging and fouling. Slagging is the formation of molten or partially fused deposits on furnace walls of boiler... Continue Reading →

Running a Coal Fired Boiler at the Best Efficiency

A pulverized coal-fired boiler is an industrial or utility boiler that generates thermal energy by burning pulverized coal (also known as powdered coal or coal dust since it is as fine as face powder in cosmetic makeup) that is blown... Continue Reading →

Agro Waste Fired Boiler

Agro-waste is agricultural waste from Agricultural or related industries. These wastes are cheap and easily available. Thermodyne Engineering Systems are main producer of Agro Waste Fired Boiler. These are generally utilized as a part of rice husk, coconut shell, biogases,... Continue Reading →

Thermic Fluid Heater Boiler – High Temperature Less Cost‎

Currently, thermic fluid heater boiler has been widely used in various applications for indirect heating process. By using petroleum fluids as heat transfer medium, these heaters provide constant temperature. Combustion system consists of fixed grate with mechanical draft arrangements. Thermic... Continue Reading →

What is a Deaerator?

Deaerator is a device that eliminates non-condensable gases - oxygen and carbon dioxide dissolved in the feed water, to prevent corrosion of the feed water system in the System Power Equipment steam generation plants, the function of open type heat... Continue Reading →

Create a free website or blog at WordPress.com.

Up ↑